Two-Channel Industrial Remote Controls

Two-Channel Industrial Remote Controls are a type of industrial remote that are basically developed for industrial applications that require one or two remote control functions. These devices are designed mainly for the gigantic machines. Manual controlling is quite difficult in the case of any gigantic machine. Using industrial remotes have made the job easier and safer.Two-channel industrial remote controls are included with a compact receiver that utilizes internal antenna design and yields up to 1000ft operational range. With this enormous operational range , these devices are ideal for power lift gates , hose reels , winch reels , or any on/off – up/down application.The receiver , in these systems , is quite powerful and the receiver unit is epoxy potted to seal against moisture and vibration. It is also constructed with rugged weatherproof aluminum enclosure. The handheld transmitters of these industrial remotes are powered by two ‘AA’ batteries along with 300 hrs of continuous transmission capability. A 56 bit digital encryption is used to ‘marry’ the transmitter and the receiver unit. It also prevents any kind of unintended operation. For better result the transmitter is sealed into a cast aluminum built cover for the most demanding usage and climate conditions.These industrial remotes are also available with up to 12 control buttons. The transmitter button text is generally custom printed in order to match customer’s requirements. The Two-Channel Radio Remote Control systems are available with different variations and all the variations include detailed electrical schematics and operating guide. It can be connected with the vehicle electrical system simply with 4-wire harness , provided with each system. Optional pre-wired solenoids are also available for getting better results in pneumatic , hydraulic , or electro-mechanical hardware interface as required.An externally mounted helical antenna is attached with this Two-Channel Industrial Remote Controls. The normal range of the antenna is up to 200 feet although higher power is also available. It can also work with great temperature specification as it can work with a temperature range of -20 F to 185 F. The ‘AA’ type battery , used in this system , has a life span of 300 hours of continuous use. Low battery flash indicator is also available in these industrial remotes. The battery can be charged up with normal 12/24 DC power supply. Charger is generally supplied with each product.As mentioned earlier , the whole device is constructed with IP68 rated , fully spotted electronics , and the device can be mounted externally on your machine. These devices are basically used for interference free operation. To ensure this , these systems are designed with frequency-hopping spread-spectrum radio technology. As a result of it , handheld as well as machine controllers automatically change its frequencies 100 times per second in order to avoid any electrical ‘noise’ or radio interference. The powerful transmitter used in these devices maintains continuous communication between the handheld and receiver ensuring the operator remains in control of the machine at all times. In case of any radio signal loss or ‘out of range’ situation , the machine can stop its operation until the signal is restored.Two-channel industrial remote controls are included with a compact receiver that utilizes internal antenna design and yields up to 1000ft operational range. With this enormous operational range , these devices are ideal for power lift gates , hose reels , winch reels , or any on/off – up/down application.